VAPOPREX HWP

• Standard design pressure 12 bars, 14.8 bars (higher pressure upon request)

• Steam production from 700 to 3,200 kg/h

• The door is hinged to the tube plate; it’s insulated on the inside with a suitable layer of refractory concrete and covers the entire heated surface of the tube plate

• Amply sized evaporating chamber with large heat exchange area for the production of high quality saturated steam

• Heat loss to the surrounding environment is limited by a layer of high-density mineral wool on the boiler body, without thermal bridges, protected by stainless steel plate (AISI 430)

• The parts subject to pressure are all welded by qualified and approved personnel, according to ENstandards

• AISI 316 blowing pipe with holes is installed inside the combustion chamber

• Anti-blast wicket gate is located in the lower part of the rear smokebox and it’s sheltered from a protection metal grid

• These modern-concept and high-efficiency generators have been designed and developed in compliance with European Directive 2014/68/UE (PED) and the most recent national and European standards on pressurized recipients

• Certified as an assembly in accordance with the PED Directive.

• The water circuit can be inspected through a manhole at the top of the boiler and a hand opening ring at the bottom

CERTIFICATION

CE mark in accordance with the following directives

Pressure Equipment (2014/68/UE)

Low Voltage (2014/35/UE)

Electromagnetic Compatibility (2014/30/UE)

ACCESSORIES AVAILABLE ON REQUEST

• Economiser: a water-flue gas heat exchanger that increases efficiency by around 4%. Its configuration and position are defined based on customer requirements

• Ladder and walkway for safe access to the walkable platform on top of the boiler

• Modulating supply system with inverter pump for optimum water level management in combination with an economiser

• Burner

• Perforated burner plate

• Second standby supply pump with valves

• System for automatically draining sludge and dissolved salts that deposit on the bottom

• Salinity (TDS) control system that measures dissolved salts in the water

• Cooling tank for sampling boiler water

• BMS 24H for up to 24 hours’ continuous unsupervised operation

• BMS 72H for up to 72 hours’ continuous unsupervised operation

• Second FAIL SAFE minimum level probe

• FAIL SAFE maximum level probe

• PLC control system fitted with high performance Touch Panel colour operator interface. The interface can be used to manage operation of the Boiler- Burner-Central Heating System

• “VRC” condensate collection vessel

• “VRD” atmospheric degasser

• “DGST” thermophysical degasser

• “BDV” drainage cooling tank

• Water treatment system

• Steam sewer