PREXTHERM T3G F ASH

• These modern-concept and high-efficiency generators have been designed and developed in compliance with European Directive 2014/68/UE (PED) and the most recent national and European standards on pressurised recipients.

• Standard design pressure 12 bars or 15 bars; higher pressures on request.

• Combustion chamber consisting of a large furnace reinforced with omega joints to guarantee operation at low heating loads, with completely water-cooled reversing chamber.

• Tube bundle on the second and third flue gas pass, with high heat exchange surface.

• Suitable insulation of the boiler body using highdensity mineral wool protected by stainless steel plate limits heat loss to the surrounding environment.

• The door is insulated on the inside with a suitable layer of refractory concrete and covers the entire heated surface of the tube plate.

• Front door with reversible opening (right and left) and innovative closing system with micrometric adjustment on the boiler front plate.

• The parts subject to pressure are all welded by qualified and approved personnel, according to EN standards.

• Maintenance guaranteed by easy access to the furnace and the tube bundle through the door, the removable smokebox and the inspection door on the boiler body.

• The water circuit can be inspected through a manhole at the top of the boiler and a hand opening ring at the bottom.

CERTIFICATION

CE mark in accordance with the following directives

Pressure Equipment (2014/68/UE)

Low Voltage (2014/35/UE)

Eectromagnetic Compatibility (2014/30/UE)

ACCESSORIES AVAILABLE ON REQUEST

• Control panel with PLC for specific communication needs to BMS or supervision systems.

• Pipe stub for instrument connection able to house all boiler control and safety instruments, available in different configurations.

• Economiser: a water-flue gas heat exchanger that increases efficiency by up to 4%. Its configuration and position are defined based on customer requirements.

• Economiser connection complete with return pipe extension, circulating pump with on-off valves and mechanical connection to the economiser performed directly at our facilities.

• System for up to 24 hours’ continuous unsupervised operation.

• System for up to 72 hours’ continuous unsupervised operation.

• Burner: brand and type chosen based on customer specifications.

• Perforated burner plate based on customer specifications.

• Ladder and walkway for safe access to the walkable platform on top of the boiler.

• Rear smokebox completely lined with high density mineral wool insulation.

• Vertical flue connection.

• Pressurised expansion vessel.

• FAIL SAFE minimum level probes.

• PLC control system fitted with high performance Touch Panel colour operator interface. The interface can be used to manage operation of the Boiler-Burner-Central Heating System.