WM F

Standard design pressure 3 bar

Screw feed assembly, the result of a single boiler-mechanical burner design.

Undergrate divided into sealed compartments for differentiated combustion air supply.

Large combustion chamber with rebound vault and reverse flue gas flow for optimum combustion

Two-stage combustion, with grate-level gasification and a wide range of primary air/secondary air ratios according to the type of fuel used. Secondary air injected by independent high-turbulence system.

High-quality mixed cast and brick refractory cladding according to the zone, tube bundle and shape of flue gas path guarantees minimum cleaning operations and complete accessibility through the side doors.

Thermostatic system for automatic screw advance and optional fire safety device.

High combustion efficiency, normally above 90% (mod. 130÷950) and 85% (mod. 1300÷4100).

CERTIFICATION

• CE Mark in accordance with following Directives:
• Machinery (2006/42 EEC).
• Low Voltage (2014/35/UE).
• Electromagnetic Compatibility (2014/30/UE).
• EN 303-5 for models 130-500.
• From 650 to 4.100 on request.
  

ACCESSORIES AVAILABLE ON REQUEST

Continuous heat output modulation: electromechanical panel with automatic fuel ignition, flame modulation, remote control, with control of combustion through LAMBDA probe.

Draught regulator: this keeps the draught in the combustion chamber constant. It consists of a sensor device and a motordriven throttle valve on the centrifugal dust separator assembly bypass duct or the flue gas exhaust inverter. This is important in terms of limiting dust emissions.

Ignition or pilot burner: allows automatic initial ignition of solid fuel, essential for materials with a high moisture content. One-piece unit with one flame (~0.25 MW), can operate on oil or natural gas.

SBS shockwave cleaning system: this reduces the required frequency for cleaning the tube bundle and ensures the heat exchanger works efficiently over time. The system is made up of a series of shockwave blowers fitted on the boiler structure, and a timer to manage correct operation. The residual dust from combustion removed from the tube bundle is carried by the flue gas and decants in the filtration system downstream of the boiler. The system works with the boiler operating.

COMPATIBLE FUEL TYPES

Waste from the first and second processing of untreated wood and cork.

Biomass (plant waste from agricultural and forestry activities and from the first processing of agricultural and food products, depleted pomace, grape seed, grape seed flour, fruit residues, peels and other plant residues).

Wood pellets.

Maximum amount of dry fuel ash: 2%.

MAXIMUM GRAIN SIZE ALLOWED, FUEL MOISTURE CONTENT, GUARANTEES ON THE COMBUSTION PROCESS AND EMISSIONS, will be defined contractually, based on specific requirements