TP3 COND 65-3200

Condensing generator with three flue passes suitable for gas and gasoil

  • TP3 COND 65-3200

Horizontal condensing generator for pressurised combustion with three flue gas passes and four-star certified energy efficiency in accordance with standard EN 15502-1.

Ready for operation in combination with a jet burner on gas/gasoil fuel.The arrangement and generous sizing of the combustion chamber guarantee a low heating load and the possibility to be  combined with burners featuring technology for the combustion with low  polluting emissions.

 

 

 


  • Technical Data

    Range consisting of 15 models with rated outputs from 65 to 3,200 kW

    Boiler body lined on the outside with steel plate protection painted with epoxy powder coat, and consisting of: pipe for the second flue pass with intake from the bottom of the furnace, sized to optimise combustion parameters; tube bundle for the third flue gas pass located at the lower part of the hot water generator, fitted with steel turbulators to increase convective heat exchange

    Energy efficiency exceeding 106%

    Design pressure 6 bars

    Maximum design temperature 100°C

    Floating combustion chamber with cooled end plate, volumetric heating load less than 1.1 MW/m3 to ensureatmospheric nitrogen oxide emissions less than 70 mg kW/h, in combination with suitable burners

    Flanged fittings complete with counterflanges

    Front door with reversible opening from both sides and innovative closing system with micrometric adjustment on the boiler body. Heat insulation using with material with excellent insulting properties and reduced thermal inertia, protected by refractory material on the furnace side and on the flue gas pass side

    Heat insulation extended to all parts of the boiler using an 80 mm thick layer of mineral wool on all the plating

    CERTIFICATION

    CE mark in accordance with the following directives

    Gas Appliances (2016/426 GAR)

    Low Voltage (2014/35/EU)

    Electromagnetic Compatibility (2014/30/EU)

    ACCESSORIES AVAILABLE ON REQUEST

    THETA+ control panel

    Electronic for managing the hot water generator (including with modulating burners), with microprocessor control; logical control unit housed inside the casing and user interface with LCD on the front panel

    Industrial control panel

    For special needs regarding precision control or installation in safe environments

    Control panel with PLC

    For specific communication needs to BMS or supervision systems

    Gas burner

    Perforated burner plate based on customer specifications

    Condensate neutraliser

    Neutralisation system essential to bring the pH of the condensate to a value above 7, allowing it to be drained with household water, as required by legislation in force

     

  • Manuals
  • Depliant
  • Certifications

Related products